|
|
About Sink Setter
- We have designed the "Sink Setter" brackets to create a solid base for sink placment. This will not only eliminate routing on rough tops, but also the need for wood braces and shims to level the sink.
- Thousands of under mount cast-iron sinks and over 30 years of experience in the countertop industry have gone into the design of the Sink Setter, making it the simplest, fastest, and most reliable sink installation system anywhere!
- The "Sink Setter" brackets will not only support the sink under the counter, but also allows for adjustment in height of the sink, insuring proper alignment with the bottom of the countertop.
- The "Sink Setter" brackets can be installed in a matter of minutes to eliminate the worry of having an unlevel and unsecure sink even if the cabinets are unlevel.
|
Product covered under U.S. Patent Numbers:
5538206, 7429021, 7698753, 8,070,110
All Rights Reserved
Product Information for All products - Click Here!
PW-99-P
Adjustable from 14” to 26” long, and is typically used in front-to-back installations in standard cabinets, or in side-to-side installation in narrow cabinets. Use for any cast iron or small single bowl stainless steel sink, china, lavatory sinks, and with most standard installations. |
View Larger Images
Instructions - Click Here |
PW-104-P a
Adjusts from 25” to 47” in length. This size works well in deeper cabinets, islands, and for side-to side installations. Use for large or double-bowl stainless steel sinks, or for any cast iron, china, lavatory, or other sinks being installed in a non-standard cabinet application. Package includes two heavy duty Sink Setter bars – adjustable to 47”, and all leveling bolts, screws and hardware necessary to install any sink. |
View Larger Images
Instructions - Click Here |
PW-114-P
Adjusts from 25” to 47” in length. This size works well in deeper cabinets, islands, and for side-to side installations. Use for large or double-bowl stainless steel sinks, or for any cast iron, china, lavatory, or other sinks being installed in a non-standard cabinet application. Package includes two heavy duty Sink Setter bars, offset and straight brackets and is adjustable to 47”, and all leveling bolts, screws and hardware necessary to install any sink. |
View Larger Images
Instructions - Click Here
|
PW-99
Adjustable from 14” to 26” long, and is typically used in front-to-back installations in standard cabinets, or in side-to-side installation in narrow cabinets. Use for any cast iron or small single bowl stainless steel sink, china, lavatory sinks, and with most standard installations.
|
View Larger Images
Instructions - Click Here
Angle setting
for Original PW-99
|
|
|
|
| |
|
©2006 Precision Works Products, Inc.
U.S. Patent No. 5,538,206, 7429021, 8,070,110 others pending. |
|
